![]() ![]() ![]() Other things Ive tried: adding a password, trying different 'model' settings in BI, finding/inspecting the camera. ![]() I have streamed into VLC and that works perfectly though. I have been following the instructions posted here but so far its not working. This is the line that enables the camera. Ive been trying to get a Motioneyeos (Raspberry Pi Zero W) camera working in Blue Iris. Next scroll to the bottom of the file and type: start_x=1 This will initiate insertion mode so you can add to the file. Once the file is open, scroll down to the last line and then type the following commands: ‘a’ Enable the camera to work with Ubuntu CoreĪccess the uboot config file with this command: sudo vi /boot/uboot/config.txt It’s nice and easy and we are working on making this process much more seamless. This is a little hacky at the moment as you need to go into the config file to do it, but don’t worry. Once you’re in, we need to enable the camera for the board. The best way to do this is to open the tutorial in a new tab, follow along to where you can SSH into the Pi, and come back when you’re done. These things, among others Setting up Ubuntu Core with the HQ Cameraįirst, to get going with Ubuntu we’re going to need to install and set up Ubuntu Core on the Raspberry Pi. ![]()
0 Comments
Leave a Reply. |